Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Too Holder Management


CamMan1
 Share

Recommended Posts

Just wanted anyone who is interested to know that David Colin has updated his tool management software for use with Mastercam X6. It will now allow you to manage holders for V8 Thru X6. He has also recently added the ability to change background and foreground colors and font styles. This will probably only apply to people who are still using the older style surface toolpaths. Added link below.

 

Download

Link to comment
Share on other sites

Hmm, couldn't install it. Error window pops up and states: "Cannot download the application. The application is missing required files. Contact application vendor for assistance."

 

According to "ClickOnce Deployment" troubleshooting errors, the problem is described as follows:

"One or more of the files listed in the application manifest cannot be found on the server. Verify that you have uploaded all the deployment's dependent files, and try again."

Link to comment
Share on other sites

Hmm, couldn't install it. Error window pops up and states: "Cannot download the application. The application is missing required files. Contact application vendor for assistance."

 

According to "ClickOnce Deployment" troubleshooting errors, the problem is described as follows:

"One or more of the files listed in the application manifest cannot be found on the server. Verify that you have uploaded all the deployment's dependent files, and try again."

 

Make sure you have the latest .NET installed with all updates and Windows installer 3.1.

Then you should be able to download the setup file by clicking on installer on the linked webpage.

 

 

try this link here for complete installation files.

 

Download Full

 

After installing it close it and reopen it and it will auto upate to the latest version. V1.0.0.17

Link to comment
Share on other sites

any documentation on usage?

 

No there is no documentation. It is pretty straightforward You just need to set up your directories. One points to the tool folder where your Holder.MCX file is. The other points to the directory where you have your custom toolholder profiles drawn. The program basically just overwrites Holder.MCX with the custom profile you select. When you start the software it will show you a list of your custom profiles and you just double click the selected profile and it automatically overwrites Holder.MCX. Then when you go to backplot or verify Mastercam will use the selected profile.

Link to comment
Share on other sites
  • 10 months later...

No there is no documentation. It is pretty straightforward You just need to set up your directories. One points to the tool folder where your Holder.MCX file is. The other points to the directory where you have your custom toolholder profiles drawn. The program basically just overwrites Holder.MCX with the custom profile you select. When you start the software it will show you a list of your custom profiles and you just double click the selected profile and it automatically overwrites Holder.MCX. Then when you go to backplot or verify Mastercam will use the selected profile.

Finally installed this, where is the Holder.MCX, I searched the entire MCAMX6 folder and nothing pops up !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...