Importing X6 HLE files into licensed X6?

[CBlanton]

Hi,

 

I'm currently in a 3rd year engineering program at my high school. In that class, we have numerous licensed educational seats of Mastercam X6, along with lots of other pieces of dangerous-looking equipment, available to us. I also have a copy of Mastercam X6 HLE on my laptop which I need to use in order to finish a large project with a very short deadline we were recently given.

 

So, here's my problem: After I'm done with the software part of the project, I have to create the part on a CNC. Now, as you probably know, X6 HLE was neutered specifically to prevent people from being able to do that.

 

 

So, is it possible to open Mastercam X6 HLE files on a licensed copy of Mastercam X6 and then post the NC file so I can machine the part?

[gcode]

I believe a dealer's license can do this, but there is no way to do it with an educational or industrial license

[Jayson Kramer]

it will not open or be posted on a industrial lic , but if you are taking this at school on a EDU lic you will be able to bring your EMCX-6 file to class and post it for your project there.