Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

spin / rotate / zoom


Müřlıń®
 Share

Recommended Posts

Howdy foloks, I was having a problem I need help with.

 

I am on x5, using a plain mouse and I need to be able to open the autosnap toolbar and dynamic spin/rotate/zoom from a point.

 

I am doing some engraving and the area I need to rotate around is very small and it is a real pain to chain the letters because they are 3d and have multiple branchpoints and I need to get in close. I havent done this in a while but I could have swore you use to be able to snap to a point and rotate/spin on that point.

 

When I add buttons to the toolbar they dont seem to work while I am in the toolpath menue.

 

Any Ideas?

 

Thanks...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

×   Your link has been automatically embedded.   Display as a link instead

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×