Ares 5-Axes Post

[javi11]

good morning everyone,

 

i am programming an Ares 5 axes machine and im wondering what code do i need to apply at the end of my post in order to keep the program going, in other words looping?

 

this here is the ending of the post

 

Y15.9385 Z9.2111

G1 Y16.3867 Z9.3146

G00 Y14.7205 Z8.93

M9

M5

G0 Z30.

G49

G5P0

G53G90G00G49Z-4.H0

M99

%

 

what code should i add and where?

 

thank you

[ajmer]

try an M02

[javi11]

i replaced the M99 with the M02 and it did not work. any other suggestion?

[EX-wccprogrammer]

To create a 'loop', the program to be looped should be a subprogram. You could write a dummy 'master' program that simply calls the looped program 1000 times, like this:

 

O1234
M98 P4321 L1000
M30

 

Leave the M99 in your 'subprogram'.

 

HTH

[Craig-B]

Try this,

You can loop back to any block number in the program by useing the P and the block number you want to start on at after the M99. This will run non stop until you reset the machine or turn on Op stop. See example

 

N1 (START OF PROGRAM)

;

your part prpgram

;

M01(OP STOP)

M99P1(THIS WILL LOOP BACK TO N1)