MAZAK G83 CYCLE PROBLEM

[ROCKHOUND]

WE JUST GOT A NEW MACHINE IN LAST WEEK MAZAK QUICK TURN W/ LIVE TOOLING AS WE WORK THE BUGS OUT OF THE POST I NOTICED THE ON THE DRILLING CYCLE IT ONLY PECKS ON THE FRIST HOLE WHEN IT MOVES TO THE NEXT IT DRILL STRAGHT TO THE BOTTOM .....ANYONE ELSE HAD THESE PROBLEMS????

 

 

 

HERE IS THE CODE

 

 

(1/8 DRILL)

(DRILL)

N9 T0909

G17 G98

G0 C0

G0 X.505 Y.2525 Z.25 M8

G97 S2500 M203

G83 Z-.6226 R.15 Q.05 F2.0 M10

X.505

Y-.2525

X.505

G80

M9

M212

G30 U0 V0 W0 H0 M205

M01

[K2csq7]

You don't have G98 or G99 at the beginning of the drill cycle line.....

[tryon]

I think You need the Q value on every line you want to peck. lathes dont usually have G81 so G83 no Q no peck.

[ROCKHOUND]

I think You need the Q value on every line you want to peck. lathes dont usually have G81 so G83 no Q no peck.

 

THAT WAS THE PROBLEM IT HAS TO HAVE THE Q VALUE THANKS !!