Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Code Expert Font Size

John Morris

Recommended Posts

Thanks Guys, I had not seen the zoom slider or even thought about zoom as being a work around. Zoom will work I suppose, I was hoping for a font setting that would repeat each time you open it. Maybe there is a setting to keep the zoom where ever you leave it . . . . . . .

Link to comment
Share on other sites

Aaron, you are correct. I was shaking my head no, but it turns out the key is to use the ctrl-mouse wheel ( per John McCord above) to zoom and it sticks (for me anyway). Before I read your post I was just using the slider at the bottom which apparently does not stick.

Link to comment
Share on other sites
  • 9 years later...

In addition to the application settings Aaron points out, you can also set options in NC Configurations which are utilized to define settings for unique machine settings.  They are easily defined using the NC Configuration button on the ribbon:


And you can switch between them using a context menu option in an NC  file (Code Expert ships with a number of default configurations - edit them or add/remove as desired):


Hope this helps.


  • Thanks 1
Link to comment
Share on other sites

I played around with it and I see that editing the config makes a direct change. I see the "windows standard" ctrl roll zoom works also. I did not see changing the font size in the documents setting page make any effect. 


Good to finally find out about the windows zoom. It overrides ant setting in code expert. Regardless of the settings, newer monitors have very fine settings which are not good for my old eyes.......

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

  • Create New...