UseValuesFromPost() Only Half Working

[DaveNiewinski]

In Mastercam, when I set a miscellaneous int in a toolpath, disable "Automatically set to post values when posting", and then post, those values are passed to the post without a problem.

 

When I use this code below in a NetHook, the values are set, and that box is disabled in the path, but the post is using its default values until the toolpath is regenerated:

 

op.MiscValues.UseValuesFromPost = false;
op.MiscValues.Integers[0] = 1;
op.Commit(false);

 

Both of those methods make the Misc. Values page look identical under the path, but only the manual one seems to work without regenerating. Am I missing something?

[Roger Martin from CNC Software]

What version of Mastercam?

What version of the NETHook API? v2 or v3 ?

What type of Operation is your "op".

[DaveNiewinski]

Sorry for the delay responding. It's any kind of operation. Seems to happen with all operations. I've forced it to regenerate if the "UseValuesFromPost" was true before the change, which works, but is cumbersome.

 

It's NETHook3_0.

 

Mastercam X7 MU1