Rotating a rotary Toolpath

[Candyman]

Hi All,

in the most basic terms I have a rotary toolpath of say a 90 deg sweep slot to machine...

I want the axis to start at 0 deg and rotate to 90 deg...

but when I post the resulting toolpath reads something like starting at 90 then machining to 180 deg

can I somehow select a setting that rotates my output?

Thanks Paul

[crazy^millman]

Setting maybe if you post had the shift logic built into it. Easier way would just be to use the correct plane and be done with it.

 

HTH

[TonyThom]

I have a similar issue. I need to simply rotate my c axis so that the knuckle will not interfere with stock. I have tried using different planes rotated but the gcode is always the same. How or where do I make this happen.