cimco editor

[LEV]

I have been running cimco editor that comes with mastercam all the time.

Everything was running fine. But recently I start having problems opening the editor.

I got the message “mastercam hasp not found!”

At the same time I have no problem opening mastercam.

So obviously mastercam can find the hasp.

 

I’m running windows 7.

I tried using windows compatibility mode and it did worked for a while,

but today I started computer after a long weekend & cimco editor refuses to open.

 

Any help will be greatly appreciated.

 

Lev

[JeremyV]

Have you updated HASP with a new "maintenance code"?

[Midwest]

Had the same problem, this fixed it for me.

 

Sentinel_LDK_setup.zip

 

 

 

From this Mastercam Support page.

 

http://www.mastercam.com/Support/Downloads/Misc/Default.aspx

 

 

Top one on the list.

[LEV]

Thank you for replies.

I did updated hasp with a new code.

 

 

The problem is solved.

I contacted Cimco support & they helped me.

[Oppiz]

Here's my Cimco problem: If I have Cimco open with a posted program and I repost the same program it doesn't over write it like it has for years. This happens sporadically.