BACK BORES, O-RING ugh...

[CEMENTHEAD]

Back bores and o-ring plunge tools Simulate as solid tools in verify.

 

 

I really dislike this simulator/verify. Hope it gets better

 

I swear at it every day.

[Product Manager CNC Software]

Cementhead - Please send in a part with the tools you are using to [email protected]. I would like to see why we aren't supporting the tools you are using. Also please let me know which version of Mastercam you are using.

[crazy^millman]

I really dislike this simulator/verify. Hope it gets better

 

Hum just did a 120 op part and it was nice adding operations and seeing the verify on my other screen go along and along while I was programming my part. Making my life so much quicker and easier having the ability to check as I go along and along. Yes it is getting better, problem is without people alerting them and sending in items to review hard to review all the different things.

[CEMENTHEAD]

Please send in a part with the tools you are using to [email protected].

 

was sent yesterday 3:50pm eastern

[Ryan Butt CNC Software]

Thanks, we received the file in QC and were able to reproduce the issue. This has been logged this as D-10070 so development can take a closer look.

[CEMENTHEAD]

On 2/28/2014 at 5:05 PM, Ryan Butt CNC Software said:

Thanks, we received the file in QC and were able to reproduce the issue. This has been logged this as D-10070 so development can take a closer look.

It's been a few years.. still broke.

[Ryan Butt CNC Software]

Send us an email at [email protected] and we may be able to help you with this.

[jlw™]

Are you talking like keyseat cutters?  I verify them all the time.

[CEMENTHEAD]

On 2/26/2014 at 9:55 AM, CEMENTHEAD said:

 

Back bores and o-ring plunge tools Simulate as solid tools in verify.

 

 

[CEMENTHEAD]

On 2/28/2014 at 5:05 PM, Ryan Butt CNC Software said:

Thanks, we received the file in QC and were able to reproduce the issue. This has been logged this as D-10070 so development can take a closer look.

@

Ryan Butt CNC 

15 minutes ago, Ryan Butt CNC Software said:

Send us an email at [email protected] and we may be able to help you with this.

This has been logged this as D-10070

[Ryan Butt CNC Software]

I'm aware this has been logged but again, if you email us at [email protected] we can offer you a possible solution in the meantime.