Mastercam X , HASP not found (15)

[Kdiver]

I cleaned up my computer and re-installed Windows 7 64bit.

This is after formatting the drive.

 

I had this problem before but do not remember how I fixed it.

 

I had this problem before when I first installed Mastercam X on my Windows 7 64 bit

I've been running it now for 3+ years.

I decided to clean up the machine and re-install the OS.

Now I keep getting "HASP not found (15)

 

I installed the old drivers , didn't work

I went to the Mastercam site and installed the latest drivers for Mastercam , didn't work

I went to the Sentinel site and installed the latest drivers for the HASP , didn't work

I had it run in Windows XP service pack 3 compatibility mode , didn't work

 

I did all of the above after hitting pressing F8 during system start-up to display Advanced Boot Options, and select Disable Driver Signature Enforcement

 

I've been running this exact software on this exact system for years .. this should not be this hard .

 

 

. HASP-x shows HASP found.

 

But no matter what I do .. Mastercam will not run. Any ideas ?