Verify glitch?

[BBprecise]

Anyone notice that if you have 2 of the exact same tools back to back (yes they have different tool numbers) and when you have verify set to change colors on tool change instead of operation change that the colors don't change? I messed with this for 15 minutes thinking I had something messed up.

 

This is in mill, don't know about lathe.

[rocheey1]

if they are also cutting the exact same geometry, the colors shouldn't change

[BBprecise]

The tools are the exact same geometry and they also cut the same area, but the roughing tool leaves material on the sides and floors. With color loop set for tool change it should change color at tool change regardless of geometry. It's been that way on all previous versions of verify so I don't know why that part would have changed. If that's the case why would it change with color loop set to operation?

[Product Manager CNC Software]

BBprecise - This was a bug that was fixed in X7MU2. This will be released shortly to the public, we are just finalizing everything for the installation at this time.

[CamMan1]

Is there a rough release date window for X7MU2? It would be nice to know so I could schedule update time between my projects.

[BBprecise]

10-4

[CamMan1]

Guess they are not touching that question with a 100 ft pole.

[crazy^millman]

CamMan problem is they put a date out there and miss it then certain people like to get the pitch forks and such for someones head. They are working on it and when it is done and they feel they have achieved what they are after then it will be out until then they are aware of your issue which is addressed in that release.

[CamMan1]

CamMan problem is they put a date out there and miss it then certain people like to get the pitch forks and such for someones head. They are working on it and when it is done and they feel they have achieved what they are after then it will be out until then they are aware of your issue which is addressed in that release.

 

Thanks for the insight.

[crazy^millman]

Day or two on the forum.