Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Multiaxis toolpath input window cut pircures and clumns


Hans
 Share

Recommended Posts

I haven't use Multiaxis toolpath for a awhile. Today, I try to do one toolpath but I found that the toolpath setting window got some problem!! The picture at right is been cut as my attachement. If only the picture is cut would be fine. But, in Collision Control tag, the icon at right side of the table is been cut also. (See the other attached picture) Then I can not define the checking surface!

 

I tried to change my laptop resolution, icon size setting, connect to a external screen. Nothing help! Could any one help me to fix it? Is there a setting in Mastercam I should change?

 

Thanks.

post-49562-0-98956800-1395126104_thumb.png

post-49562-0-66047300-1395126131_thumb.png

Link to comment
Share on other sites

Hi Guys,

 

Thanks for all the information. Finally I got the reason of that: Disply Setting.

 

I'm using win 7 OS. In control Panel, the display default is Mediumn - 125%, but I changed to Smaller - 100%. Problem solved after I changed back to default. I did one more test for Larger - 150% setting, the picture at right would be cut a little bit, but the new problem is the window becomes too big that I can not hit OK button.

 

For your information, I'm using Dell M4600, resolution is 1920 x 1080 (The recommended and the highest option)

 

Thanks for all the hints which let me find out the problem!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...