Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Recommended Posts

I would like some suggestions for a deep micro trepanning operation we need to do. It looks like a blind weld prep around a hole that is .101 +/- .001 dia. the small dia. of the prep (O.D.) is .141 +/- .001, the large dia. (I. D.) is .200 +/- .001. Here is the kicker, it goes .145 +/- .005 deep. There is a .010 radius on both corners at the bottom of the prep, and the .200 dia. needs a 32 finish or better. The material is Nickel 200. could anyone help me out with some advise on the best way the machine this and the best tools to use. Thanks :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...