Hello I have a Medlas m3 control (Mitsubishi). On my post i need to output feed in Inches per revolution
ptap$ #Canned Tap Cycle
pdrlcommonb
"M05", e$
pcan1, pbld, n$, *sgdrlref, *sgdrill, pxout, pyout, pfzout, pcout,
prdrlout, *feed, *speed, strcantext, e$
pcom_movea
I added the ( "m05", e$ ) line to stop the spindle which works
but I need to change the feed form F44.57 to F.0625 (3/8-16 tap)
G00G90G54X0.Y-8.886B90.S713M03
G43H203Z2.M08T123
M05
G98G84Z.