wireframe chain does not work

[chappy]

Hey i have a question i have made a  guitar body file in solidworks  and saved it as a parrasolid now when i open the file in mastercam for some reason i am not able to make a selection when i use the wireframe chaine to select the contour lines  any one has any idea

I have tried  it with  x5 and x8

 

Thanks

chappy

[Colin Gilchrist]

A solid body by default does not have any Wireframe geometry, only solid faces. You need to create wireframe geometry on the solid before you toolpath the part. Use Create > Curve > All edges. Activate the solid selection, and click on the solid. Then accept the results by pressing "ok".

[chappy]

Thanks Colin i will give it a go