Webinar: Introduction to Advanced 5 Axis Programming in Mastercam, using ModuleWorks

[Colin Gilchrist]

Hello Everyone,

 

Please join us for a free Webinar Friday November 7th at 12:00 noon Pacific time, hosted by Eapprentice.

This webinar will introduce you to the latest 5 Axis technology available in Mastercam. The ModuleWorks suite of toolpath utilities gives you unprecedented control over the cut strategy, approaches, retracts, and links within the toolpath itself. We will explore both surface (solid face) and wireframe based toolpaths.

 

Seating is limited, so sign up today!

 

Title:  Introduction to Advanced 5 Axis programming in Mastercam, using ModuleWorks

Date:  Friday, November 7, 2014

Time:  12:00 PM - 1:00 PM PST

After registering you will receive a confirmation email containing information about joining the Webinar.

 

System Requirements
PC-based attendees
Required: Windows® 8, 7, Vista, XP or 2003 Server
Mac®-based attendees
Required: Mac OS® X 10.6 or newer

Mobile attendees
Required: iPhone®, iPad®, Android™ phone or Android tablet

 

Reserve your Webinar seat now at:
https://www4.gotomeeting.com/register/445567095

 

 

 

[Colin Gilchrist]

This question came up so I thought I would mention this here as well. The ModuleWorks Toolpaths are available for anyone with a Multi-Axis license. These are toolpaths that Mastercam added to their toolpath suite.

[Joe788]

Forgot all about this. Will the webinar be available for re-viewing?

[Colin Gilchrist]

Hi Joe,

 

Yes, we should have the recording up within a couple days. I'll put up a link when the video is produced.

 

Thanks,

 

Colin

[gcode]

I'll be sure to check this one out.

[CADCAM3D5AXIS]

Thanks Colin

Looking forward to it! :cheers:

[CJep]

bump,...

[Colin Gilchrist]

Hey Everyone,

 

Here is a link to the presentation:

 

 

Thanks,

 

Colin

[gcode]

bookmarked for weekend viewing  thanks

[Colin Gilchrist]

Thanks for checking it out Tom. I noticed you are also using Vericut. We just recently became a partner with CGTech, so we will soon be offering Vericut training alongside our Mastercam training courses...

[Joe788]

Awesome. can't wait to sit down with a cold beer (or 6) and watch it at home.

[Colin Gilchrist]

Oof. Sorry everyone, the audio quality on that recording is pretty bad. I'm going to do some editing tonight and get it fixed up...

 

Gcode, the weekend will be a good time. I'll have the audio fixed by then...

[gcode]

 

 

Oof. Sorry everyone, the audio quality on that recording is pretty bad

 

LOL I watch the first 10 minutes last night... I thought it was my wireless connection