Backside or underside surfacing

[Myth Project]

How would one go about creating an underside surface or backside surface code in MCX8?  I'm not using a 5 axis machine.  What I'm going for is: using an 1/8" lollipop endmill to deburr or radius the intersection of 2 holes in a 3 axis VMC.  As of right now, the only way I know to create an underside or backside surface is by drafting the toolpath lines by hand and having the tool follow the path directly, but THERE MUST BE A BETTER WAY! Lol.  Thanks in advance for any and all help.      

[Myth Project]

I'm guessing no one else knows how to do this either? Lol.  Well ain't this the suck... 

[htm01]

well a simple search of lollipop turned up 6 pages

 

http://www.emastercam.com/board/index.php?app=core&module=search&do=search&fromMainBar=1

[Myth Project]

Hmmm, didn't think of searching lollipop...  I tried searching backside and/or underside surfacing and didn't get any hits.  Good idea htm01!

[civiceg]

Melin has 220 degree lollipop mills pretty cheap