Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Creating a Guitar heel surface.


Recommended Posts

That doesn't look too bad, though maybe a little sharp when you mirror it over.  Also you need to see how it will blend with the neck.  This sort of thing is as much art as science.


You can project lines onto the surface crossing each other like a grid, create points at the intersections, and push or pull them to tune the shape.  Then you can create new splines through the points, aligning at the ends to straight lines for angle control, and use those new splines to make a new coons patch surface.

Link to comment
Share on other sites

I got it, guys, thank you for the help. I used Create Surface, Swept with 2 rails. I picked the top profile, and the beginning of the neck profile. My two rails were one side, down from the top profile, and the curved line in the middle. I then mirrored the surface, and used the split surface tool to clean up the excess.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

×   Your link has been automatically embedded.   Display as a link instead


  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us