Combining features in a active report set up sheet.

[JonBlinder]

Is there a way to combine sub reports in such a way that I can have data from both reports end up in the same table on my set up sheet? I would like to have things from my -operation sub report inside my -tool sub report. I'm trying to condense stuff down on my setup sheet. I would like to have my tool data (pocket number, size, type, etc) together with their max and min Z depths for example. I'm using X8 and just now starting (attempting to figure out how) to use active report set up sheets. I've got a fairly decent report that works, I'd just like to tweak it some more. Thanks in advance.

[NOTW Programmer]

Have you gone through the Active Reports Training Tutorial? If you have not I suggest you do, if you don't have it send me a PM.

 

-Bill

[Mick from CNC Software Inc.]

Jon, do a search on these forums for "active reports", "reports" or "setuup sheet" etc as there is a lot of postings on the matter that should also help.

 

It occurred to me with all the Set-up sheets and Report posts that it might make sense to condense them all into one stickied thread.

[JonBlinder]

Thanks. I think I was able to figure out something I like and that works for us.

 

 

Sent from my iPhone using Tapatalk