Quadro card driver

[WesC]

Is everyone using the driver suggested on the Solidworks website (http://www.solidworks.com/sw/support/videocardtesting.html)?

 

I have been getting this error (Unsupported model view matrix values) with X9, after having a session open for an hour or so.

I have a Quadro 2000D card.

It was suggested I update the video card driver to the most current.

 

Thank you for any input.

[Greg Williams]

I don't think that is a video card error, my hunch is something has gone wrong within the veiw matrix in mastercam itself, send the file to QC, see what they say

[WesC]

Thank you Greg,

 

I will send this off the QC.

 

Are people using the latest greatest NVIDIA drivers for their Quadro cards, or are they using the ones suggested by the Solidworks website?

[Guest]

I only used the SW drivers if I was having an issue, I generally run the latest drivers available, haven't had to roll one back in years

[gcode]

running the latest greatest here on my K4200

my Quadro FX-3800 at home is no longer supported by the latest greatest

I think it was dropped off the supported hardware list in the newest release

[Jayson Kramer]

John, I am feeling dumb were do I get the SW drivers? It has been forever.

[BenK]

Jay,

Select "Partner Certified Driver" from download type.

[Jayson Kramer]

Thanks got it.