Update to X9

[Hertz]

IT just updated my computer with an X9 update 1 but I didn't get to see what the update addressed. Is there somewhere I can see what was changed or updated? If I go to whats new, it just shows whats new in X9.

[Mgrenier]

Look here: http://forum.mastercam.com/Topic8911.aspx

[Hertz]

Premium members only.

[?Mark]

Issues Addressed by Mastercam X9 Update 1

• Radial chip thinning factor (RCTF) changes the FPT, feed, and speed
• Update All option not updating feed and speed
• Invalid radius condition on chamfer mill
• Moving entity blanks geometry instead of deleting it
• Xform functions not creating new geometry
• ATP only processes one operation per level
• ATP custom cut list fails without front/back identifiers in file names
• Extruding and analyzing solids error
• Switching WCS on toolpaths used in Nesting causes error
• NCI not updated after changes in Plane Manager
• Multiaxis linking move inverts tool
• Locking four-axis toolpath around X-axis rotates around Y-axis
• Mill-Turn machine deactivates some CAD functionality
• Files with many tools/operations delay opening of Toolpath parameter page
• Copying a tool not marking operation dirty
• Mastercam start-up issues for some OS/processor combinations

MCfSW specific Issues Addressed

• Toolpaths marked dirty after frequent associativity checks
• Stock Flip flips solid body in wrong direction
• Loop flip not working on containment selections
• FBM Drill hole direction arrows and circles not displaying properly
• SpacePilot and other 3Dconnexion device errors

[Mgrenier]

Hertz,

 

You can be a member of the mastercam site, all you need is a valid HASP number.

[Hertz]

I believe IT has done so already. I will have to see if he will give me that user and pass. Thanks. And Thanks Mark

[Henk]

You can be a member of the mastercam site, all you need is a valid HASP number.

 

 

AND you have to be on maintenance.!!

Our maintenace expired, and now that forum is blocked, exept the useless 'Non-maintenance Customer Forum'.