Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

2D High Speed - Dynamic Milling Changing Feed Rates


Recommended Posts

Hello everyone,

   Suddenly, the 2D High Speed - Dynamic Milling changing the feed rates.  I think I did something wrong and don't know how to fix it.  Please help...

 

%

O0258(BASE - OP1.NC Post REV.3)

(SOURCE= CAP INSPECT FIXTURE.MCX-9)

(PART NAME= CAP INSPECT FIXTURE)

(UNPROVEN SOURCE FILE)

(POSTED ON SEP.02.2015 AT 9*17AM)

(STEVEN LUONG)

(VERTICAL)

(*)

(MATERIAL TYPE= 7075 - ALUMINUM)

(STOCK SIZE= X4.75 Y1.50 Z1.00)

(NOTE= 1 PIECE PER P.O)

(*)

(TOTAL TOOL FOR BASE - OP1 IS: 1 TOOL)

(*)

(TOOLS LIST)

(T7=.7500, 3/4 EM, CB,)

(3FLTS 1.000LOC, 1.25LOH)

(==================)

(*)

(WORK OFFSET LIST)

(G54 B90.)

(X0= RIGHT EDGE OF STOCK)

(  Y0= REAR EDGE OF STOCK)

( Z0= TOP OF STOCK Z-.015)

(*)

N7(.7500, 3/4 EM, CB,)

(3FLTS 1.000LOC, 1.25LOH)

G0 G17 G40 G49 G80 G90

G91 G28 Z0. M19

T7 M6(ROUGH OUT SURFACE, CUT#2)

G90 G54(Z STK= .005)

(ADOC= .1250)

X.4772 Y-.5913 S7500 M3

G43 H7 Z1. M8(DOC= Z.005)

G90 Z.1875

G1 Z.01 F100.

X.438 Y-.6849 Z.007 F50.

G3 X.425 Y-.75 Z.005 R.1689

X.4184 Y-.9186 R1.9588

(Cutting...)

G2 X.363 Y-1.2861 R40.3423 F50.

G1 X.361 Y-1.3119 F50.73 === NO FEED RATE NEEDED

X.3575 Y-1.3386 F52.52=== NO FEED RATE NEEDED

X.3525 Y-1.3653 F54.33=== NO FEED RATE NEEDED

X.3461 Y-1.3919 F56.16=== NO FEED RATE NEEDED

X.3381 Y-1.4181 F57.98=== NO FEED RATE NEEDED

X.3286 Y-1.4438 F59.81=== NO FEED RATE NEEDED

X.3177 Y-1.4689 F61.63=== NO FEED RATE NEEDED

X.3054 Y-1.4933 F63.45=== NO FEED RATE NEEDED

X.2918 Y-1.5169 F65.27=== NO FEED RATE NEEDED

X.2771 Y-1.5395 F67.07=== NO FEED RATE NEEDED

X.2612 Y-1.5613 F68.86=== NO FEED RATE NEEDED

X.2445 Y-1.5819 F70.64=== NO FEED RATE NEEDED

X.2268 Y-1.6017 F72.4=== NO FEED RATE NEEDED

X.2085 Y-1.6203 F74.14=== NO FEED RATE NEEDED

X.1895 Y-1.6378 F75.87=== NO FEED RATE NEEDED

X.17 Y-1.6543 F77.57=== NO FEED RATE NEEDED

X.1501 Y-1.6698 F79.25=== NO FEED RATE NEEDED

X.1299 Y-1.6841 F80.9=== NO FEED RATE NEEDED

X.1094 Y-1.6976 F82.53=== NO FEED RATE NEEDED

X.0888 Y-1.71 F84.14=== NO FEED RATE NEEDED

X.0682 Y-1.7215 F85.72=== NO FEED RATE NEEDED

X.0475 Y-1.7322 F87.27=== NO FEED RATE NEEDED

X.0268 Y-1.742 F88.79=== NO FEED RATE NEEDED

X.0063 Y-1.7511 F90.29=== NO FEED RATE NEEDED

X-.0338 Y-1.7668 F93.16=== NO FEED RATE NEEDED

X-.0732 Y-1.7801 F95.93=== NO FEED RATE NEEDED

X-.112 Y-1.7914 F98.62=== NO FEED RATE NEEDED

G2 X-.3942 Y-1.8354 R1.5682 F100.

(Cutting...)

X-2.2982 Y-.3611 Z.01

G0 Z1. M9

G91 G28 Z0. M5

G28 Y0.

G90 G54 X0.

M1

M30

(10807CHAR, 10.8422KB.)

%

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...