Need Metric Thread help

[MikronGuy]

Guys

Was wondering if anyone has the spec for a M19 x .35 6H class thread

[The Cathedral]

M19.000 X 0.350-6H internal thread.

Allowance class is.............................  H
Tolerance grade for pitch dia. is..............  6
Tolerance grade for minor dia. is..............  6
Number of starts...............................  1
                                   Metric        Inch
Pitch is......................... 0.350      0.01378

Minor dia. is................from 18.621      0.73311
                               to 18.721      0.73705

Calculated P. D. tolerance is.... 0.105      0.00413
Therefore it is being made equal
to .25 pitch.

Pitch dia. is................from 18.773      0.73909
                               to 18.860      0.74252

Major dia. is................from 19.000      0.74803
                               to 19.156      0.75417

Allowance is..................... 0.000      0.00000
Minor dia. tolerance is.......... 0.100      0.00394
Pitch dia. tolerance is.......... 0.087      0.00344
Max. flat at major dia. is....... 0.044      0.00172
The helix angle is............................. 0.340
Or if you prefer   0 Degrees  20 Minutes  24 Seconds
Run date is 11-10-15

[MikronGuy]

thanks Catherdral

[jlw™]

Cathedral, is that threadtech?

[The Cathedral]

Yes sir it is. Software is bulletproof, even though the interface looks directly out of Windows 3.x

[CADCAM3D5AXIS]

Or Maybe 3.11 Windows for Work Groups ??

[jlw™]

So, where can a fella get another copy of it?  I had it on an old compaq laptop that died in aught4.  I can't seem to find where to buy it again.

[The Cathedral]

www.threadcheck.com