Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Convert to 5 axis problem


Jasond0530
 Share

Recommended Posts

I have a surface finish radial path with rotation set to about +15mm from origin, starting at 180deg and doing a 360 sweep at .25 deg steps.

In the convert to 5 axis I have it set to angle of 25 degs. Back plot shows fine albeit with a rotation around origin but when I post it errors out with limit error (cimco post).

Is there another way to tilt the b axis and run a radial path without negative tilt.

M/c is a dmu evo 60!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...