Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

issue with dynamic toolpath


04Nryder
 Share

Recommended Posts

Hi,

 

New to the forum for posting anyway have been doing alot of reading but I am having issues with dynamic toolpath not locking in the feedrate. When I do a simulation on the path feed rate is not what I set. Anyone with any help would be appriciated. Running X9

 

 

  • Like 2
Link to comment
Share on other sites
  • 2 months later...

I made a dynamic opirough this morningwith Mastercam 2017 and I do not like the results.  It only wants to use tricoidal toolpath only.  On X9 with the same toolpath the toolpath does a contour path around the part until it needs to use tricoidal  toolpath.  Is this a bug in 2017?

 

Change to stay outside in the 1st window. Something to get use to in 2017.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...