Okuma -Genos -560 v 4 axis

[mig]

 Hello,

  We upgraded our Okuma  - Genos 560 v   to 4 axis .

    Problem  by setting on parameters page , maximum   rotary can make 27 rotation on one direction.

 What if I want  cut surface  with continues rotation?

    Is it possible  to change the settings for no limit ? What if I set  p/n travel limit to   zero ?

 

  Thank you  in advance   

[YoDoug®]

The other way to set up the machine is set the Multi-turn parameter to ineffective. This requires a direction M code (M15/M16) and your largest single move can only be 359.999 degrees. A continuous cut for more than 359.999 degrees would need to be broken up into one command line for each 359.999 max move.

[jeff]

The other way to set up the machine is set the Multi-turn parameter to ineffective. This requires a direction M code (M15/M16) and your largest single move can only be 359.999 degrees. A continuous cut for more than 359.999 degrees would need to be broken up into one command line for each 359.999 max move.

Would this remove the maximum value of 9999.9999 degrees that I currently have? And allow for unlimited continuous rotation in one direction?

[YoDoug®]

Would this remove the maximum value of 9999.9999 degrees that I currently have? And allow for unlimited continuous rotation in one direction?

 

You would need to have a line of code for each rotation beyond 359.999, but the control would look ahead and run as a smooth continuous rotation. The catch is that if you are going to do continuous full rotation loops, IE;

 

G01 X-1 A360

G01 X-2 A360

G01 X-3 A360

 

For this to work you would need to program those moves in G91 incremental. Otherwise the control will look at its current position and not move A because it is already there. Some CAM software posts have the ability to break up rotary move greater than 180 degrees. That works as well. 

[Orvie]

I had this issue with rotary limits.

I had to set the Multi-turn parameter to ineffective.

To avoid the directional codes (M15/M16), I set my rotary parameter to shortest direction.

 

Shortest direction for rotation direction ( not M15 M16)

NC Optional Parameter Bit No 69

 

Bit 0 4th-Axis to 1

Bit 1 5th-Axis to 1

Bit 2 6th-Axis to 1

 

After reset or Power on the rotary axis will always use shortest connection between 2 positions with M15 and M16 we can control CW or CCW.

 

Short cut by M-Code

 

M403 : 4th-axis

M404 : 5th-axis

M405 : 6th-axis

 

If you issue M15 (M115) or M16(M116) in program this becomes direction command not shortest path

 

If you change work coordinates machine will move not move in the shortest path 

 

Program Example:

 

(****************************************)
N1 (FOIL) M01
G30 P1 (TOOLCHANGE POSITION)
M181 (CHIP CONVEYOR ON)
M355 (CHIP COOLANT ON)
G111 T1 Q0
VTWOH[1]=-.3125 (TL COMP ON FOR TCPC)
(T1 - H1 - D1)
(5/8 BALL ENDMILL)
(DIA .625" - CORNER RAD .3125)
G00 G15 H1
G56 H1
M510 (CAS OFF)
X-11.6083 Y-1.9062 Z5.9391 A101.2357
G169 H1 X-11.6083 Y-1.9062 Z5.9391 A101.2357
S5600 M03
G131 F8000. J0 E.003 D.001 I0 L5. R.005 K3
Z.919
Y-1.5138 Z.997
G94 G01 Y-1.1215 Z1.0749 F150.
X-11.6082 Y-1.1268 Z1.1012 A100.9599 F300.
X-11.606 Y-1.1415 Z1.2495 A85.4882
X-11.5961 Y-1.0763 Z1.4348 A55.8885
X-11.5888 Y-1.0019 Z1.4987 A40.8955
X-11.5814 Y-.9275 Z1.5626 A25.7614
X-11.5735 Y-.8311 Z1.5807 A10.502
X-11.5711 Y-.8012 Z1.5887 A5.7444
X-11.5656 Y-.7347 Z1.5988 A355.2277
X-11.5587 Y-.6423 Z1.5664 A340.0684
X-11.5518 Y-.5499 Z1.534 A325.0362
X-11.5461 Y-.4214 Z1.3851 A295.3682
X-11.5453 Y-.3892 Z1.3002 A289.0178
X-11.5462 Y-.374 Z1.2585 A289.7559
X-11.5467 Y-.3584 Z1.217 A290.4958
X-11.546 Y-.3423 Z1.1757 A291.2397
X-11.5468 Y-.3254 Z1.1342 A291.9895
X-11.5491 Y-.308 Z1.0934 A292.7302
X-11.5495 Y-.2903 Z1.0528 A293.4758
X-11.5494 Y-.272 Z1.0123 A294.2268
X-11.5507 Y-.2531 Z.9722 A294.9761
X-11.5536 Y-.2336 Z.9323 A295.7212
X-11.554 Y-.2137 Z.8926 A296.474
X-11.5551 Y-.1933 Z.8532 A297.2318
X-11.5574 Y-.172 Z.8138 A297.9923
X-11.5575 Y-.1507 Z.7749 A298.7437
X-11.5591 Y-.1287 Z.7364 A299.5258
X-11.5609 Y-.1061 Z.698 A300.2703
X-11.5614 Y-.0828 Z.6594 A301.0443
X-11.5636 Y-.0594 Z.6218 A301.8735
X-11.5656 Y-.0348 Z.5835 A302.4494
X-11.566 Y-.0136 Z.5513 A304.1174
X-11.5674 Y.0018 Z.5305 A307.9043
X-11.5686 Y.0188 Z.5104 A311.5583
X-11.5704 Y.0367 Z.4917 A315.2044
X-11.5719 Y.0558 Z.474 A318.8959
X-11.5712 Y.0761 Z.4576 A322.6086
X-11.5751 Y.0976 Z.4424 A326.3255
X-11.5769 Y.1196 Z.4287 A330.0139
X-11.5799 Y.1429 Z.4163 A333.758
X-11.582 Y.1665 Z.4055 A337.4472
X-11.5843 Y.1906 Z.3963 A341.18
X-11.586 Y.215 Z.3887 A344.8915
X-11.5876 Y.2397 Z.3827 A348.6942
X-11.5896 Y.2706 Z.3771 A351.6457
X-11.5909 Y.3065 Z.3721 A353.7988
X-11.592 Y.342 Z.3685 A355.9657
X-11.5967 Y.3782 Z.3659 A358.196
X-11.597 Y.3849 Z.3657 A358.6152
X-11.5979 Y.4139 Z.3648 A.4193
X-11.6014 Y.4503 Z.365 A2.6674
X-11.6039 Y.4858 Z.3664 A4.87
X-11.6064 Y.5212 Z.3692 A7.0658
X-11.6077 Y.5565 Z.3733 A9.2788
X-11.6103 Y.5915 Z.3786 A11.469
X-11.613 Y.6264 Z.3851 A13.6562
X-11.6162 Y.7377 Z.3949 A.158
X-11.6161 Y.9422 Z.3417 A333.9499
Y.9434 Z.3412 A333.7973
X-11.6109 Y1.1038 Z.2037 A307.1523
X-11.5978 Y1.1886 Z.0084 A280.3121
X-11.5828 Y1.178 Z-.2054 A253.8917
X-11.5697 Y1.0848 Z-.3794 A230.7023
X-11.5728 Y1.0473 Z-.4238 A229.2913
X-11.5743 Y1.0084 Z-.4675 A227.8339
X-11.5746 Y.969 Z-.5097 A226.4824
X-11.5758 Y.9278 Z-.5516 A224.9707
X-11.5773 Y.886 Z-.5924 A223.5437
X-11.5788 Y.8307 Z-.6417 A219.6621
X-11.579 Y.7642 Z-.6916 A214.4093
X-11.5795 Y.6961 Z-.734 A209.5408
X-11.5797 Y.624 Z-.7707 A204.583
X-11.5796 Y.5487 Z-.8012 A199.5885
X-11.5793 Y.4712 Z-.8249 A194.61
Y.3916 Z-.8419 A189.5953
X-11.5801 Y.313 Z-.8517 A184.6885
X-11.5808 Y.2721 Z-.8536 A182.1551
X-11.5816 Y.2321 Z-.8548 A179.6833
X-11.5833 Y.1512 Z-.8509 A174.6705
X-11.5855 Y.0704 Z-.8399 A169.587
X-11.5854 Y-.0083 Z-.8221 A164.6194
X-11.5859 Y-.0842 Z-.7981 A159.8165
X-11.5867 Y-.1574 Z-.768 A155.0849
X-11.5915 Y-.228 Z-.732 A150.3558
X-11.5904 Y-.2951 Z-.6907 A145.6774
X-11.5899 Y-.3594 Z-.6434 A140.9094
X-11.5908 Y-.4193 Z-.591 A136.1308
X-11.5917 Y-.4753 Z-.5331 A131.302
X-11.5925 Y-.5255 Z-.4717 A126.5945
X-11.5933 Y-.5634 Z-.4184 A124.0957
X-11.5942 Y-.597 Z-.3678 A122.3631
X-11.5978 Y-.6289 Z-.3162 A120.6153
X-11.5974 Y-.6591 Z-.264 A118.8043
X-11.5984 Y-.6878 Z-.2107 A116.9943
X-11.598 Y-.7146 Z-.1568 A115.3203
X-11.5993 Y-.7389 Z-.1047 A114.1277
X-11.5994 Y-.7609 Z-.0556 A113.4718
X-11.6013 Y-.7821 Z-.0067 A112.9349
X-11.6018 Y-.8026 Z.0416 A112.408
X-11.601 Y-.8228 Z.0902 A111.8761
X-11.6033 Y-.8424 Z.1391 A111.3415
X-11.6056 Y-.8615 Z.1882 A110.8101
X-11.6066 Y-.8804 Z.2379 A110.2696
X-11.6062 Y-.8987 Z.2872 A109.7389
X-11.6044 Y-.9167 Z.3367 A109.1931
X-11.6052 Y-.9341 Z.3866 A108.6361
X-11.6078 Y-.9509 Z.4367 A108.084
X-11.609 Y-.9672 Z.4868 A107.5339
X-11.6088 Y-.9834 Z.5377 A106.9774
X-11.6071 Y-.999 Z.588 A106.4323
X-11.6066 Y-1.014 Z.6386 A105.8851
X-11.6094 Y-1.0283 Z.6895 A105.3343
X-11.6108 Y-1.0422 Z.7404 A104.7859
Y-1.0559 Z.792 A104.2326
X-11.6094 Y-1.069 Z.8431 A103.689
X-11.6074 Y-1.0816 Z.8943 A103.1458
X-11.6086 Y-1.0935 Z.9457 A102.5999
X-11.6084 Y-1.1051 Z.9971 A102.0556
X-11.6083 Y-1.1161 Z1.0487 A101.5116
Y-1.1215 Z1.0749 A101.2357
A101.2253
X-11.6076 Y-1.1268 Z1.1012 A100.9497
X-11.6072 Y-1.132 Z1.1272 A93.2241
X-11.6042 Y-1.1418 Z1.2475 A85.4921
X-11.5943 Y-1.079 Z1.431 A55.9066
X-11.5868 Y-1.009 Z1.5087 A40.9105
X-11.5785 Y-.9213 Z1.5655 A25.7667
X-11.5706 Y-.8302 Z1.5934 A10.4935
X-11.5682 Y-.8006 Z1.5974 A5.7134
X-11.563 Y-.7351 Z1.5987 A355.2053
X-11.5554 Y-.6393 Z1.5781 A340.0357
X-11.549 Y-.5514 Z1.5347 A324.9997
X-11.5449 Y-.4756 Z1.4661 A310.1004
X-11.543 Y-.4195 Z1.3806 A295.3449
X-11.5419 Y-.3969 Z1.3213 A292.1711
X-11.5409 Y-.3821 Z1.2792 A289.369
X-11.5403 Y-.3668 Z1.2374 A290.1077
X-11.539 Y-.351 Z1.1959 A290.8493
X-11.5378 Y-.3346 Z1.1545 A291.5959
X-11.5381 Y-.3175 Z1.1133 A292.3409
X-11.5382 Y-.3 Z1.0725 A293.0839
X-11.5372 Y-.282 Z1.032 A293.8322
X-11.5366 Y-.2635 Z.9917 A294.5823
X-11.5374 Y-.2443 Z.9515 A295.3296
X-11.5378 Y-.2246 Z.9117 A296.0786
X-11.5373 Y-.2045 Z.8723 A296.8341
X-11.5378 Y-.1837 Z.8327 A297.5936
X-11.5377 Y-.1624 Z.7935 A298.3499
X-11.5373 Y-.1407 Z.7547 A299.1171
X-11.5377 Y-.1185 Z.7164 A299.881
X-11.5376 Y-.0956 Z.6781 A300.6408
X-11.5379 Y-.0722 Z.6399 A301.4431
X-11.5386 Y-.0481 Z.6021 A302.1466
X-11.5389 Y-.0356 Z.5826 A302.4352
X-11.5386 Y-.024 Z.5648 A303.2691
X-11.5382 Y-.0069 Z.5402 A305.9963
Y.0091 Z.52 A309.7176
X-11.5386 Y.0266 Z.5006 A313.3688
X-11.539 Y.0452 Z.4826 A317.0392
X-11.5384 Y.065 Z.4656 A320.7433
X-11.5387 Y.0859 Z.45 A324.4606
X-11.5403 Y.1075 Z.4358 A328.1662
X-11.5415 Y.1306 Z.4226 A331.8856
X-11.5427 Y.1545 Z.4111 A335.6058
X-11.5435 Y.1779 Z.4015 A339.3204
X-11.544 Y.2008 Z.3937 A343.0465
X-11.5453 Y.226 Z.3869 A346.8076
X-11.5462 Y.2545 Z.3812 A350.1886
X-11.5465 Y.2895 Z.376 A352.7451
Y.3258 Z.372 A354.9095
X-11.5478 Y.361 Z.3694 A357.1125
X-11.5493 Y.3957 Z.368 A359.3438
X-11.5502 Y.4204 A.9278
X-11.5506 Y.4307 Z.3679 A1.584
X-11.5521 Y.4501 Z.3683 A2.7101
X-11.5533 Y.486 Z.3703 A4.917
X-11.5545 Y.5217 Z.3736 A7.1171
X-11.5548 Y.5571 Z.3782 A9.3342
X-11.5561 Y.5919 Z.384 A11.5284
X-11.5569 Y.6093 Z.3874 A12.6243
X-11.558 Y.6411 Z.3939 A13.7194
X-11.5602 Y.7534 Z.4006 A.2283
X-11.5606 Y.8561 Z.383 A347.3633
Y.8579 Z.3825 A347.1369
X-11.5584 Y.9572 Z.341 A333.8606
X-11.5557 Y1.0437 Z.2786 A320.5512
X-11.5508 Y1.1138 Z.1991 A307.187
X-11.5444 Y1.1649 Z.1043 A293.6939
X-11.5366 Y1.1929 Z.002 A280.3181
X-11.5284 Y1.197 Z-.1065 A267.0083
X-11.52 Y1.1767 Z-.211 A253.8906
X-11.5113 Y1.1333 Z-.3083 A242.2536
X-11.5062 Y1.0872 Z-.3732 A230.7155
X-11.5068 Y1.0687 Z-.3957 A230.0095
X-11.5075 Y1.05 Z-.4179 A229.3027
X-11.5077 Y1.0308 Z-.44 A228.5736
X-11.5079 Y1.0114 Z-.4619 A227.8436
X-11.5076 Y.992 Z-.4833 A227.1672
X-11.5073 Y.9723 Z-.5045 A226.49
Y.9518 Z-.5261 A225.7335
X-11.5077 Y.9119 Z-.5665 A224.262
Y.8896 Z-.5883 A223.5471
X-11.5078 Y.8638 Z-.6125 A221.6064
X-11.5075 Y.8333 Z-.639 A219.6651
X-11.5068 Y.8001 Z-.6652 A217.0391
X-11.5064 Y.7675 Z-.6888 A214.4129
X-11.5059 Y.7343 Z-.7106 A211.9789
X-11.5055 Y.6995 Z-.7315 A209.5444
X-11.5049 Y.6639 Z-.7508 A207.0657
X-11.5044 Y.6278 Z-.7685 A204.5865
X-11.5038 Y.5906 Z-.7847 A202.0893
X-11.5032 Y.5526 Z-.7993 A199.5915
X-11.5025 Y.5142 Z-.8123 A197.1021
X-11.5019 Y.4753 Z-.8235 A194.6122
X-11.5013 Y.4359 Z-.8331 A192.1045
X-11.5008 Y.3959 Z-.841 A189.5964
X-11.5005 Y.3569 Z-.847 A187.1425
X-11.5003 Y.3175 Z-.8513 A184.6884
X-11.5002 Y.2776 Z-.8541 A182.185
X-11.5003 Y.2572 Z-.8546 A180.9267
Y.237 Z-.8551 A179.6816
X-11.5004 Y.1962 Z-.8543 A177.1741
X-11.5006 Y.1555 Z-.8518 A174.6669
X-11.5008 Y.1149 Z-.8475 A172.1239

[Brad Lisle]

exactly what they said! set Multi-turn parameter to ineffective (off). For a P100M, P200M or P300M control it is in the rotary axis parameters somewhere or set Parameter 39 bit 3 (A-axis), bit 4 (B-axis) or bit 5 (C-axis) depending on rotary orientation to unchecked. You will also want to set Parameter 69 bit 0 (4th axis) to checked for shortest rotation. Also make sure you have Parameter 15 bit 7 checked if you are running in inch mode. The control will need to cycle power before the parameter change will be effective. You will also want to configure your machine configuration to break rotations into quadrants if using shortest distance or force M15/16 for rotation direction.

[mig]

Thank you guys  for your advise . 

 I will definitely will try as far I will get the chance