Mcam 2017 copying entities to another level

[DCOPE17]

In X9, I would go down to the level at the bottom right of the screen and right click it. then I'd select what entities I wanted to change the level of. I could also copy them to the new level. 

How do I do that with 2017?

Thanks in advance for your help.

Dan 

[Guest]

Right click in the geometry level....all that functionality is on the RMB

 

Well...most of it at least

[compressor sam]

right click, and the pop up bar contains the icon for change levels

[DCOPE17]

Right click in the geometry level....all that functionality is on the RMB

 

Well...most of it at least

never tried this, but looks similar, I can copy the entities in a level then paste them in another. 

 

I assume that pasts all the entities of that specific level. 

 

I'm looking for just a few entities. 

[Guest]

never tried this, but looks similar, I can copy the entities in a level then paste them in another. 

 

I assume that pasts all the entities of that specific level. 

 

I'm looking for just a few entities. 

 

It can move whatever you pre-select

[DCOPE17]

right click, and the pop up bar contains the icon for change levels

 

This is it... I went through all those icons and right clicked them. but right click didn't work. it is specifically to change levels of entities so left click and it does what I need it to. 

 

Thanks. 

[DCOPE17]

It can move whatever you pre-select

 

Didn't know that, so you can pre-selsct entities then copy them over. Good to know. thanks for the help.

[Matthew Hajicek - Singularity]

I tried following along here but I can't figure out how to copy selected entities to the current level in 2021.

 

Nevermind, you have to select "move" and then it gives you the option to "copy".  Not intuitive.