how to remove I0. or J0. in mastercam post

[stevelinar]

Hi all,

could someone show me how to remove whether I or J in Matercam post when it is just 0.?

Ex: G3X0.Y5.I-1.768J-1.768
I0.J-5.
X-1.768Y4.268I0.J-2.5

Thanks.

[Guest]

Wrong forum....

 

Moving to Post Forum

[stevelinar]

Ooops...

[Mgrenier]

I don't know which post you are using, but in my posts it is all in the parc post block.

Here is what 1 of mine looks like:

 

parc            #Select the arc output

      if (plane$ = zero & (arctype$ = one | arctype$ = four)) |   #XY Plane

        (plane$ = one & (arctypeyz$ = one | arctypeyz$ = four)) | #YZ Plane

        (plane$ = two & (arctypexz$ = one | arctypexz$ = four)),  #XZ Plane

        [

        result = newfs(two, iout)

        result = newfs(two, jout)

        result = newfs(two, kout)

        ]

      else,

        [

        result = newfs(three, iout)

        result = newfs(three, jout)

        result = newfs(three, kout)

        ]

      if (plane$ = 0 & arctype$ < five) | (plane$ = 1 & arctypeyz$ < five) |

        (plane$ = 2 & arctypexz$ < five) | full_arc_flg$,

        [

        #Arc output for IJK

        # If you do NOT want to force out the I,J,K values,

        # remove the "*" asterisks on the *i, *j, *k 's below...

        if plane$ = zero, *iout, *jout, kout #XY plane code - G17

        if plane$ = one, iout, *jout, *kout  #YZ plane code - G19

        if plane$ = two, *iout, jout, *kout  #XZ plane code - G18

        !i$, !j$, !k$

        ]

      else,

        [

        #Arc output for R

        if abs(sweep$)<=180 | (plane$ = 0 & arctype$ = five) | (plane$ = 1 & arctypeyz$ = five) |

          (plane$ = 2 & arctypexz$ = five), result = nwadrs(srad, arcrad$)

        else, result = nwadrs(srminus, arcrad$)

        *arcrad$

        ]

 

HTH

[stevelinar]

Hi Martin,

It works beautifully..

really appreciate your help.

Stev.

[Mgrenier]

Glad to help!