Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

small drill


petro7
 Share

Recommended Posts

Looking for another supplier to buy a 40 micron drill. osg has them but they are 320.00 per drill. all the other supplier stop at 50 micron. any other suggestions will help. Thanks. Been using harvey tool for the 50 micron holes but they don't go smaller then that.

  • Like 3
Link to comment
Share on other sites
  • 2 weeks later...

I am curious to know how you set the tool height with such a small drill. I have been looking at a Parlec optical tool pre setter but even using that, they recommended something like minimum size of .005".

 

LeoC

Parlec will do it but you might have to adjust the illumination to get the length correct.  It's good for checking run out too.  More than a tenth of runout would break a drill that size.  I break them just taking it out of the package.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...