Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Creating a ball gage tangent to a solid


So not a Guru
 Share

Recommended Posts

Is this possible in MC?

We get a lot of fairly close tolerance countersink callouts & what we usually do is put a M00 that tells the operator to put a positive height offset for the tool in, before running the c'sink. Then after it's ran, they check it by measuring with a ball gage & adjust the offset accordingly.

I always have to draft the geometry of the c'sink & ball dia to determine what the measurement should be.

I was just wondering if there was a more faster way to do this.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...