Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Surface High Speed ( Area Ruff )


Recommended Posts

Hi all,

Has anyone experienced Area Ruff not leaving the required material, I don't mean to much

but not enough. Almost cut to Zero in some details.

I don't understand why, on some floors of Details theirs is .010 - .015 and some other

places 0.002

Programmed using X9

any insight would be great

Link to comment
Share on other sites

I've had that problem with Haas machines if I didn't have the smoothness settings right. The roughing cutters over-ran and left gouges in the part that wouldn't clean up with the finish tool. There are settings in the Haas control to allow for acceleration/deceleration, but if set too loose (so the machine runs smoother), can overcut if you are not leaving enough stock.

Link to comment
Share on other sites
22 hours ago, Johnny M said:

Hi all,

Has anyone experienced Area Ruff not leaving the required material, I don't mean to much

but not enough. Almost cut to Zero in some details.

I don't understand why, on some floors of Details theirs is .010 - .015 and some other

places 0.002

Programmed using X9

any insight would be great

Tool  pulling out of holder?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...