Stock model not showing up after calculation, no errors.

[huskermcdoogle]

Have you ever had a stubborn stock model?  You calculate, it take 10 minutes, finishes, then doesn't show up still as dirty.  Seems this used to happen and a reboot would take care of it, now its being stubborn and won't come up.

 

ugh, feels i am making a career out of this darn part.  

[Guest]

Most times for me, it's one of 2 things...

You have the wrong wcs selected for the stock model or you're using a centerdrill....

[Matthew Hajicek - Singularity]

Break it up.  Sometimes I have to feed only one operation at a time into the stock model.

[huskermcdoogle]

Planes were off on one that wasn't completing, but the other wasn't so in this case nothing seemed to help other than a full reboot, which took care of it.  Seems there are multiple issues with stock model...  When are they going to improve on it a bit more, seems to be very buggy.  Large ball tools + rotary = crash, crash, or just crunchin forever.  NCI is only like 2000k.  Not that big in terms of surfacing paths that I normally create.