Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Toolpath to use


ahaslam
 Share

Recommended Posts

I'm trying to machine a cylinder on a tombstone setup. In the image, you can see I used a multiaxis flowline to machine the front face of the cylinder. I'm happy with that tool path but I would like some advice on the next toolpath. I want to do some type of multiaxis swarf surfacing. I highlighted the surfaces I intend to swarf in red. I've tried a few tool paths but can't get anything close. Could someone give me a hand on parameters to get an output about the B axis?

Thanks,

EMASTERHELP1.JPG

Link to comment
Share on other sites

Am I missing something?

I would position the tombstone straight on, run a flowline as far as I could staying off the flat.......use a smaller ball to get closer to the flat floor, then a 2D Swept to blend the remaining to the square corner...

No reason for multi-axis on that part that I can see....all 2D/3D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...