Hey Guys, there has been a lot of talk lately about hollow stock models.
I first started seeing these in X9.
I have been using this workaround for over a year now and it works for me
and perhaps will work for others.
I will never use an STL as stock in the Verify module.
But I WILL use a Stock Model with the shape defined by an STL that has been saved from the Verify module.
I have found that I need to use fairly tight tolerances for good results.
The
Hey Guys, there has been a lot of talk lately about hollow stock models.
I first started seeing these in X9.
I have been using this workaround for over a year now and it works for me
and perhaps will work for others.
I will never use an STL as stock in the Verify module.
But I WILL use a Stock Model with the shape defined by an STL that has been saved from the Verify module.
I have found that I need to use fairly tight tolerances for good results.
The