Crash on startup

[heavymetal]

I have been using X9 for a while and just recently it won't start anymore.

I have tried reinstalling twice and it still does the same thing. This is what is happening. I double click the icon and  the splash screen comes up for a few seconds and then disappears, then nothing ever happens. I have tried deleting both the config files. Does anyone know what the problem is.  TIA

Here is the log:

Type,Date,Time,Part file,Message,Total time,Process ID
"Information","4/20/2017","07:10:11","","Mastercam Event log cleared.","",4696
"Information","4/20/2017","07:10:16","","Restart and Recovery: registering for restart and recovery.","",2964
"Information","4/20/2017","07:10:16","","Restart and Recovery: recovery registration succeeded.","",2964
"Information","4/20/2017","07:10:16","","Restart and Recovery: restart registration succeeded.","",2964
"Information","4/20/2017","07:10:17","","Getting EXE path...","",2964
"Information","4/20/2017","07:10:17","","Parsing command line arguments...","",2964
"Information","4/20/2017","07:10:17","","Checking HASP...","",2964
"Information","4/20/2017","07:10:17","","Checking valid OCX enviroment...","",2964
"Information","4/20/2017","07:10:17","","Initializing registry...","",2964
"Information","4/20/2017","07:10:17","","Getting OS information...","",2964
"Information","4/20/2017","07:10:17","","Allocating memory...","",2964
"Information","4/20/2017","07:10:17","","Loading key mapping strings...","",2964
"Information","4/20/2017","07:10:17","","Initializing Rich Edit controls...","",2964
"Information","4/20/2017","07:10:17","","Setting product enable bits...","",2964
"Information","4/20/2017","07:10:19","","Initializing machine definitions...","",2964
"Information","4/20/2017","07:10:19","","Loading keymaps...","",2964
"Information","4/20/2017","07:10:19","","Reading key mapping file...","",2964
"Information","4/20/2017","07:10:19","","Running command line commands...","",2964

 

 

Windows 7 Professional 64bit

16GB Ram

Quadro K4000

Mastercam X9

[jerod951]

Have you tried deleting your config. file  and restarting Mastercam?

[Guest]

In the past when I had seen this behave as you've described, it was related to the Microsoft .net getting corrupted.....

Might want to look at un-installing and re-installing the Windows .net framework

 

[gcode]

Have you ( or Windows Update) updated your Nvidia graphics drivers recently

The last few release from NVIDA have been causing a lot of trouble

[heavymetal]

I repaired Windows .net framework and is working now.

Thanks JParis

[Guest]

[Roger]

59 minutes ago, gcode said:

Have you ( or Windows Update) updated your Nvidia graphics drivers recently

The last few release from NVIDA have been causing a lot of trouble

I had to revert back to the old drivers here, because when I tried to edit a tool in X9, the window only partially appeared, my task bar would change colors, and when exiting Mastercam, both my screens would flash off, and back on, and the task bar would return to it's previous color..........