Post Debugger icon not showing up

[Sonny]

Windows 7

MasterCam 2017 Update 3

Hoping someone has had the same issue. Let me start by saying that my guess is  this is a Microsoft issue and not a MCam issue. We were using the Post Debugger on MCam X9. When using X9 turned the option on while logged in as a non administrator and it worked fine. We installed 2017 using the same process to install the program as when we installed X9. We logged in as administrator, installed the program and then changed the security settings to allow full access to the non administrator.

We have gone through MCam advanced configuration and enabled the Post Debugger for 2017 after logging in as administrator and using the non administrator account. The icon only appears when logged in as administrator.  When non administrator is logged in the configuration dialog shows that the Post Debugger is enabled. We are on a network using a server. We do not allow full access or internet access when setting up the server accounts. Biggest question is why X9 worked and 2017 won't.

Thank you for any help.

[Mick George]

Sonny you will need to post this on the official Mastercam forum