Multi start thread

[Rocketmachinist]

I am trying to get Mastercam to output a multi-start threading cycle correctly.

This is what I need

%
O0000
(T)
(DATE=DD-MM-YY - 05-06-17 TIME=HH:MM - 14:07)
(MCX FILE - T)
(NC FILE - C:\USERS\ASMURPHY\DOCUMENTS\MY MCAM2018\LATHE\NC\T.NC)
(MATERIAL - STEEL INCH - 1030 - 200 BHN)
G20
(TOOL - 97 OFFSET - 97)
(OD THREAD RIGHT  INSERT - NONE)
G00 T9797
M8
G97 S200 M3
G00 G54 Z.2
X.39
G99 G92 X.1798 Z-1. E.0625
X.1724
X.1663
X.161 
X.1562
X.1562
G00 X.39 Z.1688
G92 X.1798 Z-1. E.0625
X.1724
X.1663
X.161
X.1562
X.1562
G00 X.39
M9
G53 X0.
G53 Z0.
M30
%

 

This is what I get

 

%
O0000
(T)
(DATE=DD-MM-YY - 05-06-17 TIME=HH:MM - 14:19)
(MCX FILE - T)
(NC FILE - C:\USERS\ASMURPHY\DOCUMENTS\MY MCAM2018\LATHE\NC\T.NC)
(MATERIAL - STEEL INCH - 1030 - 200 BHN)
G20
(TOOL - 97 OFFSET - 97)
(OD THREAD RIGHT  INSERT - NONE)
G00 T9797
M8
G97 S200 M3
G00 G54 Z.2
X.39
G99 G92 X.1798 Z-1. E.0625
G00 X.39 Z.1688
G92 X.1798 Z-1. E.0625
X.1724
X.1724
X.1663
X.1663
X.161
X.161
X.1562
X.1562
X.1562
X.1562
G00 X.39
M9
G53 X0.
G53 Z0.
M30
%

 

I need all the passes associated with the canned cycle and not all of them associated with the 2nd canned cycle.