Quadro Nvidia settings

[nighttowl]

I bought an Nvidia Quadro 6000 card, and a I'm not seeing any difference in performance over my old Firepro V7900 card.

Does anyone have any insight on what the Nvidia control panel settings should be for MasterCam X9 / Solidworks?

I've looked all over the internet, and all over this forum, but have not found anything useful; every web page that I've uncovered that looked like it may be helpful initially always ended with no answer, and the OP publicly berated for not having a certain video card.

Helpful answers would be greatly appreciated!

[Guest]

I think the first questions is, since installing the new card, what problems are you  having?

For starters, go into the "Manage 3D Settings" and set it to use the 3D settings for Solidworks

 

[nighttowl]

image quality during render and render speed is no different than the firepro v7900.  based on what ive read, it should be a much better card.

The benchmark test are nearly the same as well.

[Fred @ Slate Industries]

Nightshift

I bought a new monitor and at least

I could see some solid results that way.

 

[Guest]

Monitor plays a role in video performance without a doubt.

[nighttowl]

I have dual S27D590C with display port connections.

http://www.samsung.com/uk/news/local/samsungs-27-inch-s27d590c-curved-monitor-redefines-the-viewing-experience/

 

 

[Fred @ Slate Industries]

Wow nice screens

Contact   Nvidia   &  Mastetcam support directly

Baptism by fire here

I won't see a curved screen on my desk for a couple of years lol

 

 

[Guest]

Just got my wife an LG 27...

 

http://www.lg.com/us/monitors/lg-27UD69P-W-4k-uhd-led-monitor

 

Not in the same class as yours but I had to make some changes to the settings on the monitor and card in order for her to do her photo editing. Once set though, I must say the images are VERY good.

 

[JBowman]

On ‎6‎/‎18‎/‎2017 at 8:16 AM, JParis said:

I think the first questions is, since installing the new card, what problems are you  having?

For starters, go into the "Manage 3D Settings" and set it to use the 3D settings for Solidworks

 

I just installed a Quadro P2000 and I'm losing the Auto-Highlight in Trim and Fillet.  When you say to use the 3D setting for Solidworks are you talking about the Global or Program Settings?  I don't see "Solidworks" in the global settings and I did try setting the OpenGL rendering GPU to P2000 for MC 2018 in the Program Settings but it didn't solve the issue.