Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:


Rhomboid
 Share

Recommended Posts

9 hours ago, Rhomboid said:

Old XP computer dying and trying to transition to a new computer with Mastercam X.I  copied all files over and now post is putting all prep codes on first line. Each code is prefaced with N100. any help?

you should get your dealer to help you with this

you can't just copy files from one machine to another

The software needs to be properly installed and the machine, control definitions and post processors updated.

Frankly, I'm surprised you're getting any results at all 

  • Like 1
Link to comment
Share on other sites
35 minutes ago, gcode said:

you should get your dealer to help you with this

you can't just copy files from one machine to another

The software needs to be properly installed and the machine, control definitions and post processors updated.

Frankly, I'm surprised you're getting any results at all 

This ^^^^^^

Link to comment
Share on other sites
5 hours ago, Rhomboid said:

Fixed. MC updated itself to a new version of a .pst file and magic happened like gcode said. By the way I was told X isn't supported anymore and will not work above xp. Thanks  for the suggestions 

Oh it "might" work...you might however not like the performance..

Let's face it, Mastercam X was released in 2005

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...