Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Complete is messing is my 5 axis drill path


Leon82
 Share

Recommended Posts

We have 2 nc format s.

 

The old one that came with camplete works fine

The new we got from the matsuura guy stops using the clearance height after the first hole. The g43 line goes right to the retract value set in the drill parameters.  Each rotary move is posted as a 3+2 with the Twp.

The setting is not checked in mastercam to use only at start and end.

After looking thru the nc formats nothing is poping out at what's wrong.

 

Any ideas what to look at?

 

Thanks

Link to comment
Share on other sites
8 hours ago, C^Millman said:

You can change this behavior in CAMPlete I would get on the phone with them and they can walk you through the process or get ahold of your machine builder and talk to the correct Apps guy who knows CAMPlete.

:thumbup:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...