Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

CAT40 Extended Shrink fit holders


Guest
 Share

Recommended Posts

I am looking for some long shrink fit 1/8 holders....

Lyndex has a 6.3" that would be perfect but they are out of stock until late September.....

Any other options that anyone is aware of....

Techniks Slim-lines are also OOS

Edited by Guest
Link to comment
Share on other sites

Haimer running 15k on some 14.17 gauge length tools right now. Scary stuff, but it is getting it done. Back it down to 7.5k since it was just pushing the machine to hard for what I was doing.


Don't forget the slimline extensions you can shrink into a larger tool to get the length you need. I have run a 1-1/4 to a 5/8 to a 1/8 to get out about 20" long if needed.

Link to comment
Share on other sites
Just now, C^Millman said:

Haimer running 15k on some 14.17 gauge length tools right now. Scary stuff, but it is getting it done. Back it down to 7.5k since it was just pushing the machine to hard for what I was doing.


Don't forget the slimline extensions you can shrink into a larger tool to get the length you need. I have run a 1-1/4 to a 5/8 to a 1/8 to get out about 20" long if needed.

Yup, I am trying to avoid extensions but if Pioneer is OOS, that is the route I'll have to go until we can get the Lyndex's we need

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...