Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Alarm


Roger
 Share

Recommended Posts

1 hour ago, Reko said:

I'm guessing it is near the machine limit and over-travelling in X+ quadrant.

Adding a 6th pass means if is interpolating an extra time, therefore, as additional diameter bigger... so 5 passes clear the X+ soft limit... but 6 do not.

Thanks for the reply, YES, YOU ARE CORRECT!  In graphics mode it was alarming before this move, so assumed it was that line, and not the following line.  I hate making a rookie mistake like that!  For the record, G54 X4.3966, X move in program X-4.4216 (.025 off).  LOL

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...