Using "STP" file and creating toolpaths

[Cam62]

I am having issues when importing a "STP" file as the solid model and trying to create toolpaths from this solid part. I use the TURN PROFILE command and in the SHAPES group select the TURN PROFILE icon, select the solid and in the dialog box, enable SPIN and UPPER PROFILE. 

It should section and only show the upper half of the part but I cannot get Mastercam to do this? I am using Mastercam Lathe 2017 and am trying to follow instuctions as for AutoCAD and Solidworks files. (Exercise #20 in the Lathe Professional Courseware booklet). Any suggestions would be appreciated.

 

Thanks,

Cam

[#Rekd™]

Hi Cam,

Do you have a Mastercam file? It will be easier for someone to help you.

 

 

[Colin Gilchrist]

I answered your question the Mastercam NC Programmers group on Linkedin.

Turn Profile creates Wireframe Geometry of the Spun Profile. It does not automatically hide your solid body. You need to use Levels, and turn the visibility of the level with your Solid Body to "off"

 

[Cam62]

16 hours ago, #Rekd™ said:

Hi Cam,

Do you have a Mastercam file? It will be easier for someone to help you.

 

 

Thanks, but Colin answered my issue.

[Colin Gilchrist]

Oh, by the way, welcome to the Forum! You're in the right place. Stick around, and read as much as you can. I probably learned 30-50% of what I know about Mastercam here on this forum...