stich surfaces

[ihla55]

I want to know how to Stich many Surface in to 1 Surface is it possible to do that?

I am using 2018

 

 

[nickbe10]

I usually use the edge geometry of multiple surfaces to create a single surface. Most commonly for corner radius surfaces (swept surface) to give me a single  surface which works well with Flowline . Depends on the surface though. With more complex surfaces I will usually use a Blend toolpath which is not so UV dependent. You can sometimes stitch together to form a solid sheet and then convert to surface. All of this depends to a great extent on the quality of the original model, if that's what you are starting with.

What are you trying to do?

[#Rekd™]

To get some great advice attach a Mastercam file and someone will help you.

[ihla55]

Thank you for the answers.