Depth Issue on ACTIVE REPORT

[PcRobotic]

Hello Everyone,
   I've been designing active report for certain of time and I found there are two big major issue about the "DEPTH" and the "MAX-Z".  I've tried to fix them for about a month and I had no luck, would you guys please guide me through with this.

 

  "DEPTH" works for WCS, TPLANE are not the same name.  However, it does not calculate BREAK THROUGH or LEAVE ON FLOOR if any.  It only gives you ZDEPTH at the LINKING PARAMETER ZDEPTH.  

  "MAX-Z" as the data field in the report I used is only worked for same WCS, TPLANE name and if they both different names, they don't give out Z-DEPTH right.  This, it CALCULATES the BREAK THROUGH, LEAVE ON FLOOR and TIPCOMP.

ps: Please see images for illustrations.

   I asked one of the most expert guys in CNC Software, MasterCam and he said that is some kind of a bug that they will fix.  Is there anyway we can use HARD CODE as the SCRIPT to write just what I've done to fix this issue? I also attached the ACTIVE REPORT FILE just incase you guys want to look inside the file.

 

Thank you for your help,
   S.Luong

-OpDetailedHorizontal.rpx