Small right angle heads

[Smit]

I'm looking for a small right angle head, preferably high speed, that will do into a 2 1/2" cavity and drill .02 diameter holes.

We have one that will work now but it's about 6 years old and I'm looking to see if there is a better option now.

 

TIA for comments!

[Guest]

Have looked hard at these...just not gone in, had several conversations with them....

https://eltool.com/products/angle-heads

 

[msg]

nsk america, this will be your cheapest option but you will need some sort of adapter to your main head. We use tecnara and they make an adapter. 

[?Mark]

Alberti

[msg]

1 hour ago, Mark @ PPG said:

Alberti

Good choice too. 

[GoetzInd]

I've used eltool before. Currently have one running 24/6 drilling 3mm w/o any issues.

 

MIke

[robk]

We have a bunch of different brands of RAH in here. From very small to very large. I would guess we have at least 4 dozen.

The brands we have are; Alberti, Big Kaiser, Benz, Haimatec, Koma, Tecnara, ElTool.

We do use our ElTool heads to slot titanium with a 4mm end mill. It's an excellent tool.