Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Transform a Trasnform and add to WCS for each


Codeworx
 Share

Recommended Posts

I'm either missing something or this is not possible. Sample is mill default but I'm using a MPmaster based post.

I am trying to use Transform > Transform and make the output WCS for each position +1. G54.1 P11 to G54.1 P19

I'm able to get the first 5 positions but the last three don't increase (something is wrong in second transform).

I know I could make geometry to replace first transform and transform that but my file already has 300+ operations as is and adding 4 operations for each path is not ideal.

TIA

Transform Transform offset NUmbers.mcam

Link to comment
Share on other sites
2 hours ago, JParis said:

Check out the settings I changed in the transforms

Toolplane should be in use.....

https://www.dropbox.com/s/svu2mowsjxbpso3/JP_Transform Transform offset NUmbers.mcam?dl=0

Also from the 2nd transform I unchecked the ghosted OP...in the way the 1st one is set up you don't need to transform that OP with it

 

I had coordinate set because the base position is center of fixture(sorry forgot to mention it in original post), so all the positions need different output and different offset. Otherwise I would just use a subprogram.

Also when using Toolplane Rotate throws an error in MPMaster

image.png.5ea9dbe63968fa0a8566eabe04fdf6cf.png

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...