Can you prevent a single misc drill parameter from posting?

[Leon82]

Can it be to prevent output I'd a certain value is entered like .9999 or the text" null "?

[jlw™]

That is very possible, I do this in some of my posts.  I use 999. as .9999 is in the realm of possibility.

[nickbe10]

I have a custom drill cycle I am working on. One option is to reduce feed rate on exit. I have 2 custom parameters to control the start of the reduced feedrate and the actual reduced federate (normally 1/2 the normal but I want control so I have the extra parameter). If these fields are 0.0 there is a Boolean to not post the reduced exit feedrate , so the end of the cycle branches to 2 possible endings.

[Leon82]

2 hours ago, jlw™ said:

That is very possible, I do this in some of my posts.  I use 999. as .9999 is in the realm of possibility.

Yes after I posted I realised the 999. Would be better after I posted. 

[Leon82]

I was able to get it to work without branching into several Drill cycle outcomes in the drill cycle. And it made it easier to stop posting 2 parameters if I wanted.

 

[Leon82]

[if drl_prm5$<999.,*drl_prm5$]