Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Fanuc wire post question


pullo
 Share

Recommended Posts

If you turn  on listrad$ in the wire post , you can only post one profile at a time , you can't output several profiles with different power setting (offset values)

SO this structure :

%
O0001
G10P1R0.217
G10P2R0.147
G10P3R0.132
G10P4R0.132
(FUC)
G0 G21 G90
M15....

 

where the G10 are the offset values  can only exist 1 set at a time in an NC program , yet if you output two separate NC programs and then combine them manually into one program 

the control  accepts them very gratefully . SO there  seems to be no limitations on the side of the control , but the post seems to be artificially limited to output profiles with only  a single

set of Power settings (offset values) . So it's like limiting a milling program to only one tool. As Fanuc is a very common household name in wire cutting , i'd think that somebody has 

solved this conundrum before me .

 

Gracjan

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...